美国索尔维PSUP-1700 NT11 抗伽马辐射抗氧化耐碱耐热高耐水解性耐酸产品说明：
Udel® P-1700 polysulfones are tough, high-strength thermoplastics that are suitable for continuous use up to 300°F (149°C).
Udel Film is resistant to oxidation and hydrolysis and withstand prolonged exposure to high temperatures and repeated sterilization. Udel® P-1700 polysulfone films are highly resistant to mineral acids, alkali and salt solutions. Their resistance to detergents and hydrocarbon oils is good, but they will be attacked by polar solvents such as ketones, chlorinated hydrocarbons, and aromatic hydrocarbons.
Electrical properties of Udel® PSU films are stable over a wide temperature range and after immersion in water or exposure to high humidity.
The film is transparent, a light yellow color.
P-1700 NT11 物性信息：
基本信息
| 特性 | 电子束消毒 高强度 好的消毒性 抗伽马辐射 抗氧化 耐碱 耐热性，高 耐水解性 耐酸 韧性良好 食品接触的合规性
|
| 用途 | 电池 电气/电子应用领域 电气元件 家电部件 汽车电子 食品服务领域
|
| 机构评级 | FDA 21 CFR 177.1655 NSF 未评级
|
| RoHS 合规性 | |
| 外观 | |
物理性能额定值单位制测试方法
| 比重 | 1.24 | g/cm³ | ASTM D792 |
| 吸水率 (24 hr) | 0.30 | % | ASTM D570 |
机械性能额定值单位制测试方法
| 撕裂阻力 | 945 | J/cm | ASTM D1004 |
薄膜额定值单位制测试方法
| 面积系数 | 158 | ft²/lb/mil |
|
| 薄膜厚度 - 经测试 | 30 | µm |
|
| 割线模量 |
|
| ASTM D882 |
| MD | 2300 | MPa | ASTM D882 |
| TD | 2370 | MPa | ASTM D882 |
| 抗张强度 |
|
| ASTM D882 |
| MD : 屈服 | 68.0 | MPa | ASTM D882 |
| TD : 屈服 | 63.7 | MPa | ASTM D882 |
| MD : 断裂 | 58.3 | MPa | ASTM D882 |
| TD : 断裂 | 56.8 | MPa | ASTM D882 |
| 伸长率 |
|
| ASTM D882 |
| MD : 屈服 | 5.5 | % | ASTM D882 |
| TD : 屈服 | 5.1 | % | ASTM D882 |
| MD : 断裂 | 53 | % | ASTM D882 |
| TD : 断裂 | 35 | % | ASTM D882 |
| 落锤冲击 | 400 | g | ASTM D1709 |
热性能额定值单位制测试方法
| 载荷下热变形温度 (1.8 MPa, 未退火) | 174 | °C | ASTM D648 |
| 线形热膨胀系数 - 流动 | 5.6E-5 | cm/cm/°C | ASTM D696 |
电气性能额定值单位制测试方法
| 体积电阻率 | 3.0E+16 | ohms·cm | ASTM D257 |
| 介电强度 | 130 | kV/mm | ASTM D149 |
| 介电常数 (1 kHz) | 3.04 |
| ASTM D150 |
| 耗散因数 (1 MHz) | 6.0E-3 |
| ASTM D150 |
可燃性额定值单位制测试方法
| 极限氧指数 | 26 | % | ASTM D2863 |
